Swap plastic for aluminum. And forget about cracking, forever.Here are your choices: you can wait for the plastic factory thermostat housing cover to break and cause major overheating. (Even with...
Under extreme heat conditions like on the racetrack, or on the open road in high-ambient temperature areas like Florida or Texas, the E36 series’ M50, S50 and S52 engines are...
MORE POWER for BMW E9x 328i. With the on going pursuit to gain MORE..MORE..POWER.. in BMW PERFORMANCE. Active Autowerke is excited to show what a normally aspired BMW E9x 328i with the N52 motor can really produce. The results are all measured at the rear wheels, where it really counts when putting it down to the pavement.
Special thanks goes out to Dan Connor at Bimmer Performance Center in Raleigh, North Carolina for all the work in BETA Testing a 2010 BMW 128i with the N52 motor. We got almost 250 Rear Wheel Horsepower on his DynoJet, this measures out to be almost 40 Horsepower MORE over the stock on the same DynoJET.
We like the saying "...Come Play With Power..." now you can too.
The BMW 128i had the following installed on a stock BMW motor:
The absolute BEST place to buy all your Active Autowerke BMW performance parts for Christmas
DOUBLE SELECTION. Own a BMW E82 135i, Active Autowerke have your covered for the choices in exhaust systems. Straight through design with the NOISE CANCELLATION CHAMBER NCC on the GEN 1 version or a contemporary design featuring a hi-flow exhaust resonator, which is featured on the new GEN 2. LEARN MORE here about the GEN2 exhaust.
BIG SAVINGS. With R&D costs now amortized and product development completed. Active Autwerke is bringing to the table a powerful BMW CSL style header that consistently makes power. This is the same style header that was used by Robert Chang to propel his race prepped BMW E46 M3 in claiming the 2013 BMWCCA National Championship. With equal length tubular runners and a precise fitment, this new designated GEN 2 header can be distinguished by the stainless steel exterior sporting a BRUSHED FINISH.
Once costing $1,350.00, this header is now available for only $899.00. LEARN MORE on how to obtain one of these headers for yourself.
BMW E9x M3 with the Active Autowerke 700 horsepower dominates the competition. READ more here with write up, multiple videos and a list of the contenders.
SIMPLE. We want your hard earned money, that we made this the absolute best place to buy all your Active Autowerke BMW performance parts.
CLICK HERE FOR:
Own a BMW E46 M3 with headers and experiencing obnoxious un-burnt fuel smells and the annoying RASP like nose that is inherent in all BMW E46 M3. Then look what Active Autowerke now has available just for you. Learn MORE.
See a White E9x M3 powered by the Active Autowerke 700 HP supercharger running against a few other BMWs like a F82 M4 with some mods. From a rolling start, see how "Come Play with POWER" has it's rewards. Kudos goes to out to Jimmy Silva, owner of this white E9x M3 SC and the guys at Auto Talent for all of their support and hard work.
NEW exhaust for the BMW F30 335i and BMW F32 435i featuring Compact design, fantastic sound and great value. Learn MORE here.
Here is a beautifully done BMW E9x M3 with a GTRS3 Wide Body Kit as shown in Las Vegas SEMA show 2014. Named the ** Red Dragon ** and owned by Edison Hwang, this BMW M3 is powered by the Active Autowerke 700 Horsepower supercharger.
BMW power, BMW performance are some of the essential elements to this Active BMW. Want to Learn MORE on how to add 700 horses to your own BMW E9x M3? CLICK HERE.
Welcome Reggie's Motorworks, Inc. the latest Active Autowerke Software Flashing dealer in the Noblesville, Indiana area for all of your Active Autowerke tuning and BMW performance parts. Just give Reggie a call at 317-773-0074 to schedule an appointment or stop by and check out the facility. Remember, Reggie's Motorworks is also a BOSCH Service Center. Being a member of the BOSH Service network says a lot about Reggie's Motorworks and their company standing.
Here is the latest on what's NEW in BMW performance parts for your BMW E9x 328i 2006-2011. How about a 20+ rear wheel horsepower gain measure on our very own chassis dyno. See the dyno graph.
The new exhaust header will do just that for your very own E9x 328i and more with the Active Autowerke performance software
A introductory pricing package was created that includes $100.00 OFF the MSRP price and gives FREE shipping within the continental USA, Learn More Here. Or just contact Andrew Fish, Active Autowerke Sales Associate @ 305-233-9300 x 227 or e-mail Afish@activeautowerke.com for more details. This is a special deal for the first 20 buyers ONLY and is only available on the E90 POST forum. These headers will be delivered to them before December 25, 2014.
With all the buzz about the new PRIMA Supercharger kit for the BMW E46 M3 making 480 engine horses and the installation being all inclusive. Joe Barrios, the owner of The M Shop in Los Angeles, California thought the deal was not only fantastic, but super unreal. He bought 2 of these PRIMA SC kits for customers "... on the fence..." waiting for such a super deal.
So if you are in the Los Angeles, CA area and would like to see, hear and feel one of these PRIMA SC kits, then call Joe or Jon at (323) 257-5773. You will be pleasantly surprised as to how 480 horses can transform the BMW E46 M3 to another BMW performance level.
At Active Autowerke, we like the phrase "...Come Play with POWER..."
What possibilities can you do with 600 HORSEPOWER on a BMW E46 M3?
Not satisfied with just 480 HP on your existing BMW E46 M3 PRIMA supercharger. How about making 600 HP instead? Then take a look at the PRIMA PLUS + Upgrade KIT. This UPGRADE KIT works flawlessly with the Active Autowerke PRIMA SC and instantly transform 6.0 psi to 9.50 psi with just a flip of a switch.
The best deal ever if you own a BMW E46 M3 and in the market looking for some serious horsepower. How about 480+ horsepower at a incredible price to include the installation, freight and much more. All combined in an incredible ALL INCLUSIVE DEAL.
Sometimes the best thing comes in a small package. If you need to install an oil pressure gauge in your BMW, you will need this to make everything OK. The ODB-KIT makes the final connection to the engine oil artery seamless and easy.
Learn more here.
Here are some findings on the Active Autowerke E46 M3 SC with the PRIMA + and various other BETA setups. Kudos to the guys at Tuning Tech FS for their diligence in helping massage the power gains from this unbelievable SC set-up.
The Prima Dynojet results showed 426 WHP on 5.8 psi of boost. Amazing but more to come.
Going to the upgraded Prima Plus kit with methanol injection and 9.0 psi of boost raise the output to 514 WHP on a Dynojet. Unbelievable.
Active is adding a Prima Elite supercharger kit to the range. The pricing and details are not yet finalized but Tuning Tech FS is already tuning the setup.
The Prima Elite and Prima Plus both run 9 psi of boost but the Prima Elite is running E85 fuel instead of 93 octane and meth. The Prima Elite on E85 manages another 31.7 peak wheel horsepower over the Prima Plus with torque gains through the curve.
We're waiting on further details as the R&D process is wrapped up but these are solid gains over what already is a solid supercharger kit:
For the BMW E46 M3 SC running on WA/Meth, here is something different.
Individual direct port injection for your methanol. Custom fabrication with re-sized meth nozzles ending into a custom Meth housing. Only some lines visible for a super clean install.
Better atomization to each individual cylinder, and precise fluid delivery for that optimum performance.
If interested, speak to an Active Autowerke sales personnel on how to have your Active Autowerke E46 M3 SC intake redone.
BMW E92 M3 normally aspirated being tuned on the Active Autowerke in house dyno.
Running on RON 93 octane and equipped with open exhaust, larger headers and a drop in air filter, this BMW E92 M3 showed some good horsepower figures considering the high parasitic nature of the Mustang Dyno.
Measured 402 WHP vs. 329 WHP of a bone stock E92 M3 on the same dyno. That's a 73+ WHP gain.
Do the math counting the drive line loss to recalculate the ponies at the engine crankshaft.
That's some serious horsepower either way you look at it.
-Water pump delete
-Engine configurations STOCK, but blue printed to GRAND AM specs
Old friends reuniting. Here is Frank Smith from Tuning Tech,FS and Karl Hugh, Head of Engineering, Active Autowerke. Did you know that Frank used to live in Miami, Florida and he had a shop not too far from Active Autowerke. Did you know that Karl has known Frank for over twenty years.
It was a good day when old friends can reunite and talk. Talk about PRIMA, tuning, files and codes. What else would BMW tuners talk about?
It was a good day...
Follow Turner Motorsports on their Twitter feed and read all about this BMW E46 M3 stroker build. Active Autowerke is proud to be associated with partners like TMS, Forgeline wheels, Stop Tech brakes, Bilstein suspension, and P3 Cars. This is one of the many engine builds with software tuning that Active Autowerke has partnered with TMS on creating for the BMW community.
How to contact Turner Motoraport on creating your own BMW E46 M3 Stroker
Development continues on our Prima+ Kit. If you reside in the Maryland area, check out Alex Gogne and his beautiful E46 M3. What's on the inside is most impressive. With the Active Autowerke PRIMA supercharger installed and featuring a stepped exhaust header V2 design; 100 cell hi-f;ow catalysts; a X-PIPE; and a RACE exhaust system as performance mods, Alex is able to put down 426 horsepower at the rear wheels on a Dynojet under 5.8 psi of boost. As a beta-tester for the upcoming PRIMA+ featuring 9.0 psi of boost with Water/Methanol added, Alex M3 was able to record 514.20 horsepower on the same Dynojet. Working along with Tuning Tech,FS has been instrumental in acquiring results like this. The net effect is what the PRIMA and easily upgrade PRIMA+ can do. Either way, the options for further upgrades like intercooling and a upgraded fuel system makes the BMW E46 M3 the most desirable performance platform available today.
How to contact a Sales Associate
How to find detaIls on the NEW PRIMA SC system
Factory horsepower for the BMW E46 M3 is rated 333 engine horsepower at the crankshaft. What possibilities could you create with 480+ engine horsepower from a bolt on system, That is almost a 50% gain over factory. Better yet, the pricing is unbelievable.Click here for more information.
Here is the latest addition to the arsenal of BMW performance exhausts by Active Autowerke for the E9x M3. Sporting a look of all BRUSHED 304 stainless steel, this exhaust has a lot more than the obvious. With large drone cancelling mufflers, the sound can be described as exhilarating with testosterone. Learn More
What are you doing this week-end in S.Florida? Check out Formula Drift at the Homestead Motorsport Complex this Friday and Saturday, on May 30, 31 and see cars compete in a whole new spectrum. Also visit the NITTO Tire booth and take a peek at the Active Autowerke 700 horsepower supercharged V8 M3 that is on display. or find out more on drifting. Click here for more information
It all started in 2011 when Dr. Dan Schaut installed an Active Autowerke supercharger to propel his V8 E9x M3 for the OLOA race across America. Since then and for a fourth time, Dan Schaut with his son Ben Schaut has place the silver E9x M3 as the best finishing BMW. This year they won their class, and came tenth overall as well. Click here for the 2014 OLOA race results. With a stock engine and a off-the-shelf supercharger kit, we just wanted to say Thank You and kudos to another terrific accomplishment from everyone here at Active Autowerke.
Check out the New issue of Roundel Magazine. B Morgan interviews Robert Chang, 2013 BMWCCA National Champion who shares his BMW racing path to victory all within 3 years. Maybe you can do this too. Click here to take a peek.
500 horspower is what the E60 M5 V10 has. The BMW E36 M3 Euro S50B32 powered with the Active Autowerke HKS supercharger not only matches the V10 on TOP with the pony numbers, but will annihilate the M5 from 4200 rpms all the way to 7200 rpms. Click here for more information.
Now you can feel really special if you own a BMW E60 M5 or a BMW E63 M6... Active Autowerke released a software utilizing Alpha N technology to deliver an additional 30 more horses at the rear wheels as measured on the Mustang Dyno.
Easy Horsepower GAINS for your BMW E9x M3 V8. Cool and easy makes for a great week-end project, but is only intended for OFF-ROAD applications like the race track. Click here for more information.
Simply amazing. Install the Active Data Logger and see how your engine reacts on all cylinders to your present or performance tuned software. Click here for more information regarding the Active Data Logger for your software.
A 1933 Ford Roadster undergo a custom build and selects the BMW S65 as the powerplant to be fueled by the Active Autowerke Supercharger system. The power to weight ratio will be nothing but amazing. Follow the build on BimmerBoost.com for more details or
Click here for more information regarding the Supercharger system.
Introducing the latest addition to the Active Autowerke BMW Exhaust line. A E46 M3 Rear Track exhaust that weighs only 23 lbs.Click here for more details.
Do you have the May issue of Grassroots Motorsports yet? Turn to page 171 to see this familiar car blazing ahead of the competition. That's right. Robert Chang, last year's Champion in his class, is back. Contenders beware.
Are you in VA? Then stop by the VIR track this Sunday and say hello to Robert Chang. You can also root for him as he powers the E46 M3 this weekend to defend the BMWCCA 2014 Championship.
FINANCING is now available. It is Simple, Easy, and Readily available. Just speak to an Active Autowerke Sales Associate and he can get you going. Contact US
In other news, Robert Chang won again this past weekend in Austin, Texas! This is his first race for 2014. We'll keep you posted as our champion continues to dominate his class.
Our friend and customer Mark Tarr just achieved 632hp at the wheel! That equates to around 777 engine crank horsepower running on pump octane. It has been a privilege contributing to this amazing car with the Active Autowerke supercharger. Here's a link to the video:
Read the BLOG from the dyno shop: 5252 Motorsports
© 2014 Active Autowerke; Established 1981