Active Autowerke E46 M3 PRIMA PLUS + SC with 600 horsepower UPGRADE KIT

As producer of one of the finest working supercharger systems for the BMW E46 M3, Active Autowerke is

proud to introduce the PRIMA PLUS supercharger system capable of exceeding 500 WHP running on

pump drawn 93 octane. The PRIMA PLUS is an upgrade kit to the existing PRIMA supercharger system

designed to create MORE horsepower.

In collaboration with Frank Smith of Tuning Tech FS, the Prima PLUS SC kit has evolved as a fantastic

performer. With numerous dyno runs under countless hours all monitored through careful Data Logging and

Lean/Rich evaluation, this PRIMA PLUS supercharger kit is ready for the BMW enthusiast.
Special thanks goes out to Frank Smith and the guys at Tuning Tech,FS, a Active Autowerke Dealer in the

Maryland area to help launch this supercharger system.

The PRIMA PLUS is a centrifugal design supercharger using a conventional fixed drive pulley, but unlike it's

predecessors, the PRIMA PLUS also has variable boost settings of 9.0 psi and 9.5 psi to help attain the

power.

A first in the BMW forced induction industry.

For easy comparisons, here is where the PRIMA and PRIMA PLUS + stands when measuring rear wheel horsepower.

A stock BMW E46 M3 is around 265 WHP. | PRIMA SC makes 425 WHP. | PRIMA PLUS SC makes 500+ WHP.

Customer impression:

"...I intend to go to race fuel (104+) in the spring when I can drive it more.
So far the acceleration plants you into the seat. 1st and 2nd gear have the
rear tires searching for grip and I am running a 275 R compound tire. The
car feels alive and the power band is exceptionally characteristic of the
original power plant but just more power everywhere. There is no lag in
power delivery and is easy to modulate in partial and full throttle scenarios...."
MJTSUB
M3Forums member
BMW E46 M3 SC with AA PRIMA PLUS +

How Does It Work:

Running without a front mounted intercooler, the PRIMA PLUS + relies on Water/Methanol and precise tuning to

make it happen. When activated by the flip of a switch, the system develops 9.5 psi of boost and 500 + WHP.*

The Water/Methanol system combined with proper software tuning performs flawlessly, but if a problem arises

such as a low WA/Meth fluid level, excessive detonation, etc. there a immediate safeguard built in.

The system will automatically default back to the 6.0 psi level to prevent any damage to the motor.

Now you can enter the F.I. realm with a proven company known for reliability and proven performance.

Active Autowerke invites you to “Come Play with Power” with your BMW.

* Dyno results achieved with stock motor on BMW E46 M3 running 93 octane fuel.
* Car equipped with exhaust mods like headers, section 1 and a rear exhaust.

***Before your order ships you MUST sign and return the Off Road Use Only Waiver available HERE. Please email, fax or take a photo of the completed form. You can email it to your sales rep or to info@activeautowerke.com and you can fax it to us at (305) 253-8921***

Key Features:

Complete WA/Meth system
Designated trunk mounted WA tank with holding base
WA pump with internal seals and nozzles to accommodate methanol
Non intrusive mounting helps maintain existing factory trunk space (exception Convertible models)
Integrated wiring with fail safe features
Precise software tuning to match designated boost levels
Operates on 93 pump octane
Detailed Step by Step Instructions

Performance Specs:

Boost: 9.5 psi
Stock Horsepower: 333 HP @ 7900RPM
Supercharged Horsepower: 600+ HP @ 8100RPM

Stock Torque: 268 Ft Lbs @ 4800RPM

Supercharge Torque: 393 Ft Lbs @ 8100RPM

Dyno chart of PRIMA PLUS +. Take a look at the power created below:

Please Note All Supercharge Kits May Take Up To 2 Weeks To Ship. Please Call To Confirm.

AA SC Replacement Belt - E9X C38-92 GEN 8/9 Level 1

BMW E9X C38-92 Level 1 Replacement Belt

You may also like