Active Autowerke E46 M3 Prima PLUS + Supercharger with 600 horsepower Kit
Active Autowerke E46 M3 PRIMA PLUS + SC with 600 horsepower UPGRADE KIT
As producer of one of the finest working supercharger systems for the BMW E46 M3, Active Autowerke is
proud to introduce the PRIMA PLUS supercharger system capable of exceeding 500 WHP running on
pump drawn 93 octane. The PRIMA PLUS is an upgrade to the existing PRIMA supercharger system
designed to create MORE horsepower.
In collaboration with Frank Smith of Tuning Tech FS, the Prima PLUS SC kit has evolved as a fantastic
performer. With numerous dyno runs under countless hours all monitored through careful Data Logging and
Lean/Rich evaluation, this PRIMA PLUS supercharger kit is ready for the BMW enthusiast.
Special thanks goes out to Frank Smith and the guys at Tuning Tech,FS, a Active Autowerke Dealer in the
Maryland area to help launch this supercharger system.
The PRIMA PLUS is a centrifugal design supercharger using a conventional fixed drive pulley, but unlike it's
predecessors, the PRIMA PLUS also has variable boost settings of 9.0 psi and 9.5 psi to help attain the
A first in the BMW forced induction industry.
For easy comparisons, here is where the PRIMA and PRIMA PLUS + stands when measuring rear wheel horsepower.
A stock BMW E46 M3 is around 265 WHP. | PRIMA SC makes 425 WHP. | PRIMA PLUS SC makes 500+ WHP.
"...I intend to go to race fuel (104+) in the spring when I can drive it more.
So far the acceleration plants you into the seat. 1st and 2nd gear have the
rear tires searching for grip and I am running a 275 R compound tire. The
car feels alive and the power band is exceptionally characteristic of the
original power plant but just more power everywhere. There is no lag in
power delivery and is easy to modulate in partial and full throttle scenarios...."
BMW E46 M3 SC with AA PRIMA PLUS +
Running without a front mounted intercooler, the PRIMA PLUS + relies on Water/Methanol and precise tuning to
make it happen. When activated by the flip of a switch, the system develops 9.5 psi of boost and 500 + WHP.*
The Water/Methanol system combined with proper software tuning performs flawlessly, but if a problem arises
such as a low WA/Meth fluid level, excessive detonation, etc. there a immediate safeguard built in.
The system will automatically default back to the 6.0 psi level to prevent any damage to the motor.
Now you can enter the F.I. realm with a proven company known for reliability and proven performance.
Active Autowerke invites you to “Come Play with Power” with your BMW.
* Dyno results achieved with stock motor on BMW E46 M3 running 93 octane fuel.
* Car equipped with exhaust mods like headers, section 1 and a rear exhaust.
***Before your order ships you MUST sign and return the Off Road Use Only Waiver available HERE. Please email, fax or take a photo of the completed form. You can email it to your sales rep or to firstname.lastname@example.org and you can fax it to us at (305) 253-8921***
Boost: 9.5 psi
Stock Horsepower: 333 HP @ 7900RPM
Supercharged Horsepower: 600+ HP @ 8100RPM
Stock Torque: 268 Ft Lbs @ 4800RPM
Supercharge Torque: 393 Ft Lbs @ 8100RPM
Dyno chart of PRIMA PLUS +. Take a look at the power created below:
Please Note All Supercharge Kits May Take Up To 2 Weeks To Ship. Please Call To Confirm.